Between Linux and Anime

Kind of like Schrodinger's Cat

Connecting to Hidden Wireless Networks using KDE’s Networkmanager

It is not without some surprise and.. disappointment.. that I discovered that KDE’s networkmanager frontend appears to be still having trouble with hidden wireless networks. It used to be so when we used KNetworkManager, and now that we’ve moved on to the shiny new plasmoid, the problem… stayed. Oh well, the common advice that hidden SSID’s are not useful and that one should be setting up WPA encryption for true security is likely sound, but for folks like me who happen live under already-configured hidden networks, we’ll need to use a workaround for now.

To allow the networkmanagement plasmoid to detect and connect to a hidden wireless network called, say, “hiddennetwork”, open a terminal and type the following command:

sudo iwlist wlan0 scanning essid hiddennetwork

Note that you need to replace wlan0 with your wireless interface. This is usually either wlan0 or eth1. You can use the iwconfig command to find out what your wireless interface is called. Of course, also replace “hiddennetwork” with your desired hidden network.

If all goes well, your hidden network should now appear in the networkmanagement plasmoid, and you should now be able to connect to it like any other network.

1036
Rate this post
Thanks!
An error occurred!


  • Facebook
  • Twitter
  • Identi.ca
  • Delicious
  • Digg
  • StumbleUpon
  • Add to favorites
  • RSS
  • Reddit

Previous

The Rise of Plasma Activities and What it can do for You

Next

Dual/Multi-head Monitors on Linux – the Xorg Hurdle

8 Comments

  1. dhwang

    Found your blog from this video
    http://www.youtube.com/watch?v=oC_XHCloVLA

    Wish I had seen this post before I went ahead and replaced knetworkmanager and the plasmoid widget with nm-applet. Oh well, it works anyway.

  2. Jason "moofang"

    Turns out that nm-applet still handles the more complex wifi setups better, so right now I’ve actually set my box up to be able to switch between the KDE plasmoid and nm-applet. Might write a post on that when I have the time :)

  3. Thanks for the guide, worked for me , anyone else got problems i’d be happy to advise.

  4. Jason

    Hey !

    iam found your Blog over google because i have exactly the same problem.
    Your post help me a lot. The shit wireless works now :D ! BIG THANKS !!!

  5. haripetrov

    Thank you very much! Everything works fine.

  6. darko

    Thank you a lot, works just fine :)!

    All the best!

  7. Viktor

    It works fine!

    Thanks

  8. Alex

    Bless U God!
    It works.
    Slax distro
    Thank.

Leave a Reply to Alex Cancel reply

Powered by WordPress & Theme by Anders Norén